PRODUCTS - Page 2 - Palm Oil Mill Machine Leading Manufacturers and Suppliers

Cooling and Crystallization

Cooling and crystallization instructions: Cooling and crystallization are key palm oil fractionation process. Once crystallization successes, palm oil separation becomes easily. Therefore, different type of crystallization should have own cooling exchange surface, cooling system and mixture structure.Palm oil Cooling and crystallization condition determines the start of palm oil crystallization nuclei, the number of crystals and

Deodorization Section

Palm Oil Refining Deodorization Section Introduction: The qualified decolorized palm oil enters into the spiral plate heat exchanger to recover most of the heat, and next goes to high pressure steam heat exchanger to be heated to the process temperature of 240-260 degrees Celsius, and then enters the deodorizer tower. The upper layer of combined

Decolorizing Section

Palm Oil Refining Decolorizing Section Process Introduction: Decolorizing section is a major part of palm oil mill process. Decolorizing section is mainly used to remove oil pigment, residual soap particles and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decolorizing effect. The degumming oil firstly enters into

Degumming and Deacidification

Palm Oil Refining Degumming and Deacidification Section Introduction: Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 ℃ higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or

Palm Kernel Oil Refining

Type: palm kernel oil refining Processing material: palm kernel Capacity: 30-1500T/D Major Equipment: degumming tank, heat exchanger, decolorization tower, deodorization tower Application: High efficiency oil refining method applicable for crude palm kernel oil, coconut oil Palm Kernel Oil Refining Process Flow Chart: Main process of the Palm kernel oil refinery plant: ◆ Crude Palm

Small Scale Oil Refinery Plant

Type: Crude oil refinery plant Processing Capacity: 1 ~ 5T / D Processing Material: palm oil,palm kernel oil, peanut oil, rapeseed oil, cottonseed oil, sunflower oil, corn germ oil, animal oil etc. Small scale oil refining plant Introduction: Our small scale oil refinery plant are great choice for small capacity oil refinery machine.The

Nut&Kernel Separation Station

Firstly, the wet fiber and wet nut enter the cake breaker conveyor to be cracked, and mostly of the fiber should be separated by pneumatic fiber depericarper System. The nut, little fiber and big impurity will be further separated by the polishing drum. The separated nut should be sent to nut hopper through the pneumatic

Palm Kernel Recovery Station

Palm kernel recovery station assures high efficiency recovery process of palm kernel after palm oil pressing processing line. It prepares for further step palm kernel oil pressing process after splitter and crushing. Depericarper (splitter). Palm kernel separates from fibers through floating dry processing during crude palm oil processing machine. Fibers and other light stuff are

Crude Oil Storage Tank

Oil storage tank is mainly used as a crude palm oil (CPO) storage tank during palm oil process. It guarantees a certain storage temperature and good sealing. It is useful for temporary storage of crude palm oil. Technical data of oil storage tank: Oil tank volume: 2000T Diameter: 19m Tank height: 11m

Palm Oil Clarification Station

Clarification station can extract crude palm oil from sludge. The obtained crude palm oil purity can reach up 90%. The extraction oil contains 45%-55% moisture, sludge and other impurities. Purification: crude palm oil purification can improve oil purity and remove impurity successfully. Drying: Continuous Vacuum drier pumps water from crude palm oil. Palm oil moisture