LYZX34-Cold-Oil-Press-Machinery

Palm oil and palm kernel oil extraction process

Palm oil and palm kernel oil extraction process More information on palm oil, please click 1.Weighing Transport palm fruit to factory after truck weighing so as to make prompt settlement and production cost subsequent. 2.Unloading fruit Fresh Fruit Bunches (FFB) are sent to fermentation tank through transportation machinery after sieving and impurities removing. The time

Effluent Treatment System Station

The waste water has high organic matter content, biochemical oxygen demand BOD is about 25000ppm, required by qualified deal before emissions. Pool sewage treatment system is the most used and effective treatment. This palm oil mill effluent treatment system is cost-effective, only needs adequate space, less investment costs.       The equipment list of

Raw Water Treatment Station

Water consumption of the palm oil factory include: furnace feeding water, generator cooling water, production and living water, Only the after treated supply water can meet the sanitary requirement. Especially, the furnace supply water should be softened first, After anion and cation exchange resin treatment, meet the requirements of the boiler water, then be treated

Power-supply Station

Generally speaking, palm oil factory commonly be set in the palm orchard far away from the city, Power supply capacity is low. So, power-supply should be consider independently, build a captive power plant to meet the electricity needs of the palm oil factory which mainly determined by the electricity-consumption of equipment and auxiliary equipment. In

Steam-supply Station

The fuel of the boiler is fiber, Part of the steam out from the furnace supply to the turbine generator. The rest of the steam for equipment-running supply.                   The equipment list of boiler house: 1.Steam Boiler 2.Back Pressur Vessel c/w Platform 3.Back Pressure Vessel Control System

Palm Oil

Palm Oil

General introduction of palm oil and palm kernel oil: Palm oil is squeezed from the palm fruit. Palm oil contains 40% -50% of saturated fatty acids, palmitic acid takes 80%, 38% -53% of oleic acid, 6% -11% of linoleic acid, in semi-solid at room temperature, with excellent oxidation stability. Palm oil has rich nutrients and

Palm Tree Production

Palm Tree Production

Palm Tree Introduction: Palm trees are grown in tropical regions perennial oil crops,has the advantages of big yields low cost.Palm oil is already one of the world largest edibel oil production,is widely used in large food processing,cooking and eating areas of bio-diesel production.Oil palm tree main producing area distributes tropic area between the south latitude

Palm Oil Filtration

Palm Oil Filtration

Palm Oil Filtration selection is extremely important for improving yield of liquid palm oil during palm oil fractionation process. Currently industrial filtration system contains drum filter, Florentine-type continuous belt vacuum filter, and thin film filter. In recent decades, thin film filter has been widely used in palm oil fractionation since it can fractionate high yield

Cooling and Crystallization

Cooling and Crystallization

Cooling and crystallization instructions: Cooling and crystallization are key palm oil fractionation process. Once crystallization successes, palm oil separation becomes easily. Therefore, different type of crystallization should have own cooling exchange surface, cooling system and mixture structure.Palm oil Cooling and crystallization condition determines the start of palm oil crystallization nuclei, the number of crystals and

Deodorization Section

Deodorization Section

Palm Oil Refining Deodorization Section Introduction: The qualified decolorized palm oil enters into the spiral plate heat exchanger to recover most of the heat, and next goes to high pressure steam heat exchanger to be heated to the process temperature of 240-260 degrees Celsius, and then enters the deodorizer tower. The upper layer of combined